2020 RVPL Catalog

31341 31342 31357 31359 31360 31358 31361 * 31362 31363 31369 33004 33005 31364 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1” 1-1/4” 1-1/4” 1” 6-5/8” 7-7/8” 8” 6-3/4” 9” 10” 9” 10-1/2” 11-1/2” 12” 9-1/2” 9-1/2” 8” 3,500lbs (1588kg) 3,500lbs (1588kg) 6,000lbs (2722kg) 6,000lbs (2722kg) 6,000lbs (2722kg) 5,000lbs (2268kg) 3,500lbs (1588kg) 6,000lbs (2722kg) 5,000lbs (2268kg) 6,000lbs (2722kg) 12,000lbs (5443kg) 12,000lbs (5443kg) 6,000lbs (2722kg) 14-1118 14-1467 14-1121 14-1123 14-1124 14-1122 14-1125 14-1126 14-1127 14-1135 71-5213 71-5214 14-1131 PART # BALL THREAD DIAMETER LENGTH WEIGHT RATING MFG # 5/8” 2-1/4” 3/4” 2” 1” 3” * 1” 4-3/4” 1” 1” 3-1/4” 3/4” RISE CLASS II 1-1/4 " SQ. BALL MOUNTS: BLACK POWDER COAT FINISH STRAIGHT ECONOMY BALL MOUNT * Not to be used in rise position. 1-1/4” 2-7/8” 2” 3-1/4” 2-1/4” 4-1/4” 8” 2-1/4” 6” 2-1/4” 2-1/2” 4-3/4” 2” DROP CLASS V 2.5 " SQ. BALL MOUNTS: BLACK POWDER COAT FINISH CLASS II/III/IV 2 " SQ. BALL MOUNTS: BLACK POWDER COAT FINISH BALL MOUNTS Ball mounts vary by weight rating, shaft length, and rise/drop measurements. Husky’s Class I, II, III & IV Ball Mounts are manufactured with a precise rise or drop to suit each of the applications. Rise/drop measurements become important in Class III and IV, and Husky offers you a wide range of rise/drop choices. Weight rating is limited to vehicle tow rating; see vehicle owner’s manual. FOR BALL MOUNT RISE: A = Distance from ground to bottom of trailer coupler. B = Distance from ground to top I.D. of the receiver tube opening. C = Amount of rise necessary to keep trailer level. FOR BALL MOUNT DROP: A = Distance from ground to bottom of trailer coupler. B = Distance from ground to top I.D. of the receiver tube opening. C = Amount of drop necessary to keep trailer level. A: Measure from the ground to the top of the hitch. B: Measure from the ground to the INSIDE top of the trailer coupler (when level) C: Determine the “DROP” or “Rise” DROP: if the coupler is LOWER than the hitch: ADD the height of the hitch ball (usually 3”) RISE: if the coupler is HIGHER than the hitch: SUBTRACT: the height of the hitch ball (usually 3”) EXAMPLE: a 7” DROP is needed to make this trailer level. 4” (Hitch - Coupler) + 3” (Hitch Ball Ht.) = 7” (DROP) 21” 17” 4” 31341 31342 31357 31361 31364 31358 Limited lifetime warranty 6 BALL MOUNTS TOWING